<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Safety Analysis of Horizontal Curves Using Real Traffic Data
2
Safety effect of U-turn conversions in Tehran: empirical Bayes observational before-and-after study and crash prediction models
3
Safety Effects of Median Treatments Using Longitudinal Channelizers: Empirical Bayesian Before-and-After Study
4
Safety effects of shoulder paving for rural and urban interstate, multilane, and two-lane highways
5
Safety Impacts of Right-Turn Lanes at Unsignalized Intersections and Driveways on Two-Lane Roadways: Crash Analysis
6
Safety-Based Volume Warrants for Right-Turn Lanes at Unsignalized Intersections and Driveways on Two-Lane Roadways
7
Sanders shell model for buckling of single-walled carbon nanotubes with small aspect ratio
8
Sarajevo – A city profile
9
Savings to Sustainability: Application of a Novel Approach to Delivering a Sustainable Built Environment
10
Scenario-based evaluation of urban development sustainability: an integrative modeling approach to compromise between urbanization suitability index and landscape pattern
11
Scheduling FMS with alternative routings using Petri nets and near admissible heuristic search
12
Scope definition for bidding project-control services
13
Scrap tire ring as a low-cost post-tensioning material for masonry strengthening
14
Seismic damage classification and risk assessment of mountain tunnels with a validation for the 2008 Wenchuan earthquake
15
Seismic flexural behavior of concrete connections reinforced with CFRP bars and grids
16
Seismic fragilities of non-ductile reinforced concrete frames with consideration of soil structure interaction
17
Seismic Response and Performance of Buckling-Restrained Braced Frames
18
Seismic settlements of shallow foundations on liquefiable soil with a clay crust
19
Seismic soil–foundation–structure interaction observed in geotechnical centrifuge experiments
20
Seismic soil–pile–structure kinematic and inertial interaction—A new beam approach
21
Seismic testing and performance of buckling-restrained bracing systems
22
Sejong Si (City): are TOD and TND models effective in planning Korea’s new capital?
23
Selection of optimal sensor locations based on modified effective independence method: case study on a Gothic Revival cathedral
24
Selection of optimal set of cutting tools for machining of polygonal pockets with islands
25
Selection of Preoverlay Repair Methods for Asphalt Overlay on Asphaltic and Composite Pavements in Wisconsin Based on Cost Effectiveness
26
Selective detection of toxic Pb(II) ions based on wet-chemically prepared nanosheets integrated CuO–ZnO nanocomposites
27
Self-compacting concrete incorporating steel and polypropylene fibers: Compressive and tensile strengths, moduli of elasticity and rupture, compressive stress–strain curve, and energy dissipated under compression
28
Self-controlled diffusion of Al in Cu thin film
29
Self-financing and distance-based highway pricing scheme: State highway system perspective
30
Self-healing and self-repairing technologies
31
Semi-analytical consistent zigzag-elasticity formulations with implicit layerwise shear correction factors for dynamic stress analysis of sandwich circular plates with FGM layers
32
Semi-discretization for stability analysis of in-feed cylindrical grinding with continuous workpiece speed variation
33
Semi-exact elastic solutions for thermo-mechanical analysis of functionally graded rotating disks
34
Sensitivity of Flexible Pavement Thickness to Traffic Factors in Mechanistic-Empirical Pavement Design
35
Sensitization resistance of friction stir welded AISI 409 M grade ferritic stainless steel joints
36
Service condition of railroad corridors around the insulated rail joints
37
SE—Structures an​d Environment: The Penman–Monteith Evapotranspiration Equation as an Element in Greenhouse Ventilation Design
38
Shallow axial magma chamber at the slow-spreading Erta Ale Ridge
39
Shape error compensation in flexible forming process using overbending surface method
40
Shape memory alloy hybrid composites for improved impact properties for aeronautical applications
41
Shape memory polyurethanes reinforced with carbon nanotubes
42
Shaping social situations: A hidden aspect of care work in nursing homes
43
Shared roadway implementation guidance
44
Shear and flexural characterization of grid-reinforced asphalt pavements and relation with field distress evolution
45
Shear characteristics of high-strength concrete deep beams without shear reinforcements
46
Shear strengthening of RC beams with NSM CFRP laminates: Experimental research and analytical formulation
47
Shear strengthening of reinforced concrete beams using different configurations of externally bonded carbon fibre reinforced plates
48
Shock absorption performance of a motorbike helmet with honeycomb reinforced liner
49
Shock loading of 3D woven composites: A validated finite element investigation
50
Shock response of 3D woven composites: An experimental investigation
51
Short guide to direct gravitational field modelling with Hotine’s equations
52
Significance of regulation limits in mycotoxin contamination in Asia and risk management programs at the national level
53
Significance of tests for highway materials
54
Simmel's time-space theory: Implications for experience of modernization and place
55
Simple cases of bending of thin piezoelectric plates
56
Simplified seismic analysis of soil-well-pier system for bridges
57
Simulation and assessment of diamond mill grinding wheel topography
58
Simulation and modelling methods in aluminium rolling industry
59
Simulation at Extreme-Scale: Co-Design Thinking and Practices
60
Simulation of effects of metal phase in a diamond grain and bonding type on temperature in diamond grinding
61
Simulation of Nanoscale Multidimensional Transient Heat Conduction Problems Using Ballistic-Diffusive Equations and Phonon Boltzmann Equation
62
Simulation-based evaluation of traffic sign retroreflectivity maintenance practices
63
Single-element simulations of partial-drainage effects under monotonic and cyclic loading
64
Single-machine-based predictive maintenance model considering intelligent machinery prognostics
65
Single-receiver single-channel multi-frequency GNSS integrity: outliers, slips, and ionospheric disturbances
66
Site based stochastic seismic spectra
67
Site characterization using full waveform inversion
68
Sixth order differential equation for sandwich beam deflection including transverse shear
69
Size-dependent bending, buckling and free vibration of functionally graded Timoshenko microbeams based on the most general strain gradient theory
70
Size-dependent functionally graded Kirchhoff and Mindlin plate models based on a modified couple stress theory
71
Size-distribution of airborne radioactive particles from the Fukushima accident
72
Slag recycling in submerged arc welding and its influence on weld quality leading to parametric optimization
73
Slope seismic stability analysis on kinematical element method and its application
74
Slope stability problems of the weak rocks in the Asarsuyu pass of the Anatolian motorway
75
Slope topography effects on ground motion in the presence of deep soil layers
76
Small scale effect on the free vibration of orthotropic arbitrary straight-sided quadrilateral nanoplates
77
Small scale effect on the thermal buckling of orthotropic arbitrary straight-sided quadrilateral nanoplates embedded in an elastic medium
78
Small-hole arrays of ceramic material manufactured by micro powder injection molding
79
Small-scale resistance spot welding of austenitic stainless steels
80
Small-strain constrained elastic modulus of clean quartz sand with various grain size distribution
81
Smart City Reference Model: Assisting Planners to Conceptualize the Building of Smart City Innovation Ecosystems
82
Smart growth: hydrologic perspective
83
Smart Parking-Management System for Commercial Vehicle Parking at Public Rest Areas
84
Social Capital and Entrepreneurship: A Schema and Research Agenda
85
Social Sustainability an​d New Communities: Moving from Concept to Practice in the UK
86
Social Sustainability Considerations during Planning and Design: Framework of Processes for Construction Projects
87
Soil damping and site dominant vibration period determination, by means of random decrement method and its relationship with the site-specific spectral decay parameter kappa
88
Soil Resilient Modulus Regressed from Physical Properties and Influence of Seasonal Variation on Asphalt Pavement Performance
89
Soil–pile–structure interaction simulations in liquefiable soils via dynamic macroelements: Formulation and validation
90
Soil–structure interaction for the seismic design of the Messina Strait Bridge
91
Solution methods of exact solutions for free vibration of rectangular orthotropic thin plates with classical boundary conditions
92
Solution Structure for an Analytic Model of Bus Service Zones
93
Solving high-speed rail planning with the simulated annealing algorithm
94
Solving the pitch fluctuation problem during the manufacturing process of conical thread surfaces with lathe center displacement
95
Some aspects of fabrication of micro devices by electrochemical micromachining (ECMM) and its finishing by magnetorheological fluid
96
Some effects of flux physical properties on weld-bead formation, in the SAW process
97
Sound transmission loss characteristics of unbounded orthotropic sandwich panels in bending vibration considering transverse shear deformation
98
Spaghetti cooking by microwave oven: Cooking kinetics and product quality
99
Spatial discounting, place attachment, and environmental concern: Toward an ambit-based theory of sense of place
100
Spatially explicit computation of sustainability indicator values for the automated assessment of land-use options
101
Spatiotemporal heterogeneity of urban planning implementation effectiveness: Evidence from five urban master plans of Beijing
102
Spectral element model for axially loaded bending–shear–torsion coupled composite Timoshenko beams
103
Speed Stochastic Processes and Freeway Reliability Estimation: Evidence from the A22 Freeway, Italy
104
Spiral Length Design
105
Split tensile strength of binary blended self compacting concrete containing low volume fly ash and TiO2 nanoparticles
106
Stability evaluation of road-cut slopes in the Lesser Himalaya of Uttarakhand, India: conventional and numerical approaches
107
Stability of a Semi-Active Impact Damper: Part I—Global Behavior
108
Stability of a Semi-Active Impact Damper: Part II—Periodic Solutions
109
Stability of the friction stir welding process in presence of workpiece mating variations
110
Stakeholder-Sensitive Social Welfare–Oriented Benefit Analysis for Sustainable Infrastructure Project Development
111
Stan​dardization of quality management an​d quality assurance: a project viewpoint
112
Standard pedestrian equivalent factors: new approach to analyzing pedestrian flow
113
State space modeling of non-proportional passive damping in machine tools
114
Static analysis and buckling of viscoelastic plates by a fully discretized nonlinear finite strip method using bubble functions
115
Static analysis of completely doubly-curved laminated shells and panels using general higher-order shear deformation theories
116
Static analysis of functionally graded plates using a nodal integrated finite element approach
117
Static and free vibration of axially loaded functionally graded beams based on the first-order shear deformation theory
118
Static and stability analysis of nonlocal functionally graded nanobeams
119
Static bending of a functionally graded microscale Timoshenko beam based on the modified couple stress theory
120
Statistical analysis of the influence of RAP and mix composition on viscoelastic and fatigue properties of asphalt mixes
121
Statistical Analysis of the Number of Household Vehicles Used for Hurricane Ivan Evacuation
122
Statistical and genetic algorithms classification of highways
123
Statistical finite element analysis of the buckling behavior of honeycomb structures
124
Stiffened plate bending analysis in terms of refined triangular laminated plate element
125
Stochastic Analysis of the Duration of Occlusion of an Overhead Sign by a Leading Heavy Vehicle: Application to Sign Design
126
Stochastic FEM on nonlinear vibration of fluid-loaded double-walled carbon nanotubes subjected to a moving load based on nonlocal elasticity theory
127
Stochastic modeling of delamination growth in unidirectional composite DCB specimens using cohesive zone models
128
Stochastic modeling of high-stability ground clocks in GPS analysis
129
Stochastic models for transfer point location problem
130
Stochastic post buckling analysis of laminated composite cylindrical shell panel subjected to hygrothermomechanical loading
131
Stochastic strong ground motion simulations in sparsely-monitored regions: A validation and sensitivity study on the 13 March 1992 Erzincan (Turkey) earthquake
132
Straightness and flatness evaluation using data envelopment analysis
133
Strain energy based evaluation of liquefaction and residual pore water pressure in sands using cyclic torsional shear experiments
134
Strategizing sustainability: The case of River City, Gothenburg
135
Strengthening of masonry–unreinforced concrete railway bridges with PBO-FRCM materials
136
Strengthening of one-way spanning RC slabs with cutouts using FRP composites
137
Strengthening of RC one-way slabs including cut-out using different techniques
138
Stress analysis in specimens made of multi-layer polymer/composite used for hydrogen storage application: Comparison with experimental results
139
Stress analysis of axially and thermally loaded discontinuous tile core sandwich with and without adhesive filled core gaps
140
Stress analysis of long multilayered plates subjected to invariant loading: Analytical solutions by a layerwise stress model
141
Stress analysis of multi-bolted joints for FRP pultruded composite structures
142
Stress and deflection parametric study of high-speed railway CRTS-II ballastless track slab on elevated bridge foundations
143
Stress and failure analysis of laminated composites based on layerwise B-spline finite strip method
144
Stress around square and rectangular cutouts in symmetric laminates
145
Stresses in jointed rigid pavements
146
Structural assessment of a transparent wall panel with load-bearing backup framing and polycarbonate sheathing for residential construction
147
Structural configuration and building energy performance
148
Structural health monitoring for a wind turbine system: a review of damage detection methods
149
Structural investigation of composite wind turbine blade considering various load cases and fatigue life
150
Structural response of all-composite pyramidal truss core sandwich columns in end compression
151
Structural similitude for flutter of delaminated composite beam-plates
152
Structural–Architectural Integration of Double-Layer Space Structures in Tall Buildings
153
Structure an​d properties of AlSiC foam
154
Structure–soil–structure interaction between underground structure and ground structure
155
Student and Practitioner Collaboration in an Online Knowledge Community: Best Practices from a Capstone Course Implementation
156
Studies on FRP-concrete interface with hardening and softening bond-slip law
157
Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process
158
Studies on size accuracy of microgear wheels produced by powder injection molding of zirconia feedstocks
159
Studies on the effect of electron beam radiation on the molecular structure of ultra-high molecular weight polyethylene under the influence of α-tocopherol with respect to its application in medical implants
160
Studies on the effectiveness of various sulfur fertilizers under controlled conditions
161
Study of Cu diffusion in an Al–1 wt.%Si–0.5 wt.%Cu bond pad with an Al–1 wt.%Si bond wire attached using scanning electron microscopy
162
Study of friction welding characteristics of Al/SiC composite an​d application of grey-based TOPSIS
163
Study of mechanism of activating flux increasing weld penetration of AC A-TIG welding for aluminum alloy
164
Study of modal shifts to bus rapid transit in Chinese cities
165
Study of path loss and data transmission error of IEEE 802.15.4 compliant wireless sensors in small-scale manufacturing environments
166
Study of surface integrity of ground bearing steel using Barkhausen noise technique
167
Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
168
Study of the characteristics of duplex stainless steel activated tungsten inert gas welds
169
Study on activating TIG welding for aluminium alloys
170
Study on dissimilar friction stir butt welding of AA7075-O and AA2024-T4 considering the manufacturing limitation
171
Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding
172
Study on the effect of functionally graded coating layers on elastic deformation of thick circular plates: A closed-form elasticity solution
173
Study on the manufacturing process controlling for aspheric surface ballonet polishing
174
Studying key users’ skills of ERP system through a comprehensive skill measurement model
175
Sub-daily noise in horizontal GPS kinematic time series due to thermal tilt of GPS monuments
176
Sulfide removal by moderate oxygenation of anaerobic sludge environments
177
Superplastic-like forming of Ti-6Al-4V alloy
178
Support vector regression based shear strength modelling of deep beams
179
Surface and nonlocal effects on the nonlinear free vibration of non-uniform nanobeams
180
Surface hardening of AISI 4340 steel by machining: a preliminary investigation
181
Surface quality prediction and processing parameter determination in electrochemical mechanical polishing of bearing rollers
182
Surface segregation of aluminum atoms on Cu-9at.% Al(111) studied by Auger electron spectroscopy and low energy electron diffraction
183
Surface stress and strain fields on compressed panels of corrugated board boxes. An experimental analysis by using Digital Image Stereocorrelation
184
Survey of aflatoxin M1 in milk and dairy products consumed in Burdur, Turkey
185
Sustainability in the hospitality industry: Some personal reflections on corporate challenges an​d research agendas
186
Sustainable Development Goals: A need for relevant indicators
187
Sustainable manufacturing: evaluation and modeling of environmental impacts in additive manufacturing
188
Sustainable Toll Pricing and Capacity Investment in a Congested Road Network: A Goal Programming Approach
189
Sustainable urban development in historical areas using the tourist trail approach: A case study of the Cultural Heritage and Urban Development (CHUD) project in Saida, Lebanon
190
Synthesis of a novel cationic asphalt emulsifier and its investigation by online FTIR spectrophotometry
191
System reliability analysis of flexible pavements
192
Systematic Approach to Hazardous-Intersection Identification and Countermeasure Development
193
Systems model of construction accident causation
بازگشت