<< مقالات لاتين >>
<< بر اساس عنوان >>
1
IAG Newsletter
2
Ideal Design Process characterization: the impact of preliminary decision-making tools in the consumption of resources and its uncertainty
3
Identification and Prioritization of Critical Transportation Infrastructure: Case Study of Coastal Flooding
4
Identifying Precrash Factors for Cars and Trucks on Interstate Highways: Mixed Logit Model Approach
5
Identifying the time of step change in binary profiles
6
Identifying tranquil environments and quantifying impacts
7
Impact analysis of clearance occurring between polymeric pipe and connector in the process of electrofusion (EF) weldment of pipes
8
Impact damage prediction in carbon fiber-reinforced laminated composite using the matrix-reinforced mixing theory
9
Impact factors for simple-span highway girder bridges
10
Impact of abandoned and disabled vehicles on freeway incident duration
11
Impact of dynamic message signs on speeds observed on a rural interstate
12
Impact of Integration Management on Construction Project Management Performance
13
Impact of loading displacements on SLR-derived parameters and on the consistency between GNSS and SLR results
14
Impact of National Culture on the Management Practices of Construction Projects in the United Arab Emirates
15
Impact of Pavement Roughness on Vehicle Free-Flow Speed
16
Impact of seasonal station motions on VLBI UT1 intensives results
17
Impact of traffic overload on road pavement performance
18
Impact of Transaction Attributes on Transaction Costs in Project Alliances: Disaggregated Analysis
19
Impact response of Kevlar composites with filled epoxy matrix
20
Impact-induced damage and damage propagation under flexural load in TiNi and Kevlar-stitched carbon/epoxy laminates
21
Impacts of Road-Trains on the Geometric Design of Highways
22
Implementation of the EPA’s water quality trading policy for storm water management and smart growth
23
Implications of distracted driving on start-up lost time for dual left-turn lanes
24
Implications of the reduction of cutting fluid in drilling AISI P20 steel with carbide tools
25
Improved Analytic Model of the Optimum Dimensions Designated for Transit Bus Service Zones
26
Improved analytical model to predict the effective elastic properties of 2.5D interlock woven fabrics composite
27
Improved Imputation of Missing Pavement Performance Data Using Auxiliary Variables
28
Improved k-nn for Short-Term Traffic Forecasting Using Temporal and Spatial Information
29
Improved Operational Performance Assessment for Two-Lane Highway Facilities
30
Improvement compressive strength of concrete in different curing media by Al2O3 nanoparticles
31
Improvement in the mechanical performances of carbon fiber/epoxy composite with addition of nano-(Polyvinyl alcohol) fibers
32
Improvements and innovations in aerial ropeway transportation technologies: observations from recent implementations
33
Improving direct solar shading calculations within building energy simulation tools
34
Improving highway specifications for constructibility
35
Improving palliative care through teamwork (IMPACTT) in nursing homes: Study design an​d baseline findings
36
Improving prediction accuracy of thermal analysis for weld-based additive manufacturing by calibrating input parameters using IR imaging
37
Improving surface hardness of austenitic stainless steel using waterjet peening process
38
Improving systemwide sustainability in pavement preservation programming
39
In plane stiffness of multifunctional hierarchical honeycombs with negative Poisson’s ratio sub-structures
40
Inclusion of Built-In Curling Temperature Profile in Curling-Stress Determination for Rigid Pavement
41
Incorporating weather information into real-time speed estimates: comparison of alternative models
42
Incremental damage theory of particulate-reinforced composites with a ductile interphase
43
Incremental dynamic analysis of wood-frame houses in Canada: Effects of dominant earthquake scenarios on seismic fragility
44
Indoor and outdoor pollen concentrations in private and public spaces during the Betula pollen season
45
Induction-assisted laser welding of IN-738 nickel–base superalloy
46
Inelastic pile behavior with and without liquefaction effects
47
Inflation and highway economic analysis
48
Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites
49
Influence of Band-Structure on Electron Ballistic Transport in Silicon Nanowire MOSFET’s: an Atomistic Study
50
Influence of boundary conditions and temperature of dissipative heating on active damping of forced axisymmetric resonant bending vibrations of circular viscoelastic plates by piezoelectric sensors and actuators
51
Influence of carbon content on the microstructure, martensitic transformation and mechanical properties in austenite/ε-martensite dual-phase Fe–Mn–C steels
52
Influence of cracked concrete models on the nonlinear analysis of High Strength Steel Fibre Reinforced Concrete corbels
53
Influence of Diffusion Welding Time on Homogenous Steel Joints
54
Influence of flushing on performance of EDM with bunched electrode
55
Influence of functionalized carbon nanofibers on the single carbon fiber–epoxy matrix interface
56
Influence of in-plane pre-load on the vibration frequency of circular graphene sheet via nonlocal continuum theory
57
Influence of multi-impacts on GFRP composites laminates
58
Influence of multiple nitriding on the case hardening of H13 tool steel: experimental and numerical investigation
59
Influence of Negative Phase Loading on Cable Net Facade Response
60
Influence of open holes on composites delamination induced by low velocity impact loads
61
Influence of Pavement Condition on Environmental Costs
62
Influence of Person-Organizational Fit on Construction Safety Climate
63
Influence of plant coverage on the total green roof energy balance an​d building energy consumption
64
Influence of recycled aggregates containing sulphur on properties of recycled aggregate mortar and concrete
65
Influence of saw fluxes on low-carbon steel weld microstructure
66
Influence of shielding gases in the welding of metals
67
Influence of size effect on burr formation in micro cutting
68
Influence of the edge-boundary conditions on three-dimensional free vibrations of isotropic and cross-ply multilayered rectangular plates
69
Influence of track support stiffness of ballasted track on dynamic wheel-rail forces
70
Influence zone around a closed-ended pile during vibratory driving
71
Influences of Elastic and Viscous Moduli on Laser-Generated Lamb Waves in Viscoelastic Plates
72
Influences of elastic foundations and boundary conditions on the buckling of laminated shell structures subjected to combined loads
73
Influences of turning parameters in surface residual stresses in AISI 4340 steel
74
Influencing green behaviour through environmental goal priming: The mediating role of automatic evaluation
75
Information-Integration Maturity Model for the Capital Projects Industry
76
Initial results of precise orbit and clock determination for COMPASS navigation satellite system
77
Innovative Programs Promoting Careers in OR Nursing
78
In-Plane Drift Capacity of Contemporary Point Fixed Glass Facade Systems
79
In-plane free vibrations of single-layer and symmetrically laminated rectangular composite plates
80
In-plane magnetic field affected transverse vibration of embedded single-layer graphene sheets using equivalent nonlocal elasticity approach
81
In-plane mechanical properties of elliptical cell honeycombs
82
In-Plane Monotonic and Cyclic Racking Load Testing of Structural Insulated Panels
83
In-plane response of two-story structures to near-fault ground motion
84
In-plane shear behaviour of unreinforced and jacketed brick masonry walls
85
In-plane vibration of rectangular plates with periodic inhomogeneity: Natural frequencies and their adjustment
86
In-situ and laboratory tests of old brick masonry strengthened with FRP in innovative configurations and design considerations
87
Instability of eccentrically stiffened functionally graded truncated conical shells under mechanical loads
88
Integrating ISO 21500 Guidance on Project Management, Lean Construction an​d PMBOK
89
Integrating system analysis an​d project management tools
90
Integration of the fish bone diagram, brainstorming, and AHP method for problem solving and decision Making - a case study
91
Interaction between CFRP-repair and initial damage of wide-flange steel beams subjected to three-point bending
92
Interactive architectural approach (interactive architecture): An effective and adaptive process for architectural design
93
Inter-annual water mass variations from GRACE in central Siberia
94
Interchange complexity model and related safety implications
95
Interferometric architectures based All-Optical logic design methods and their implementations
96
Interlaminar stress calculation in composite and sandwich plates in NURBS Isogeometric finite element analysis
97
Intra/inter-ply shear behaviors of continuous fiber reinforced thermoplastic composites in thermoforming processes
98
Investigating seismic behavior of ballasted railway track in earthquake excitation using finite-element model in three-dimensional space
99
Investigating the effective factors on the reduction of energy consumption in residential buildings with green roofs
100
Investigating the effects of web-mediated design thinking and co-regulated learning on developing students’ computing skills in a blended course
101
Investigation into CFRP laminate anchorage systems utilising bi-directional fabric wrap
102
Investigation into laminate design of open carbon–fibre/epoxy sections by quasi–static and dynamic crushing
103
Investigation into the selective laser sintering of styrene-acrylonitrile copolymer and postprocessing
104
Investigation of air bending of structured sheet metals by multistage FE simulation
105
Investigation of knitting architecture on the impact behavior of glass/epoxy composites
106
Investigation of material improvements to mitigate the effects of the abrasion mechanism of concrete crosstie rail seat deterioration
107
Investigation of temperature effect on the mechanical properties of single-walled carbon nanotubes
108
Investigation of the asphalt mixture morphology influence on its ageing susceptibility
109
Investigation of the effect of weight factor on performance of piezoelectric weigh-in-motion sensors
110
Investigation of vibrational characteristics of composite beams with fluid–structure interaction
111
Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
112
Investigation on ball end milling of P20 die steel with cutter orientation
113
Investigation on design parameters of single-walled carbon nanotube reinforced nanocomposites under impact loads
114
Investigation on diffusion bonding characteristics of SiC particulate reinforced aluminium metal matrix composites (Al/SiCp-MMC)
115
Investigations on model-based simulation of tool wear with carbide tools in milling operation
116
Investigations on the preparation and mechanical properties of the nano-alumina reinforced cement composite
117
Irreversibly absorbed energy and damage in GFRP laminates impacted at low velocity
118
Is strategy being implemented through projects? Contrary evidence from a leader in New Public Management
119
Isogeometric analysis of laminated composite and sandwich plates using a layerwise deformation theory
120
Isogeometric finite element analysis of composite sandwich plates using a higher order shear deformation theory
بازگشت