<< مقالات لاتين >>
<< بر اساس عنوان >>
1
A beam finite element for magneto-electro-elastic multilayered composite structures
2
A CAD/CAE-integrated injection mold design system for plastic products
3
A case study of damages of the Kandla Port and Customs Office tower supported on a mat–pile foundation in liquefied soils under the 2001 Bhuj earthquake
4
A collaborative project management architecture
5
A combined elastoplastic damage model for progressive failure analysis of composite materials and structures
6
A comparative study of genetic algorithms for the multi-objective optimization of composite stringers under compression loads
7
A comparative study of sharp and round-edge tools in machining with built-up edge formation: cutting forces, cutting vibrations, and neural network modeling
8
A comparative study of the microstructure and mechanical properties of HTLA steel welds obtained by the tungsten arc welding and resistance spot welding
9
A complex potential-variational formulation for thermo-mechanical buckling analysis of flat laminates with an elliptic cutout
10
A comprehensive model of the psychology of environmental behaviour—A meta-analysis
11
A constitutive model for fiber-reinforced polymer plies accounting for plasticity and brittle damage including softening – Implementation for implicit FEM
12
A continuous velocity field for Norway
13
A continuum mechanics framework and a constitutive model for predicting the orthotropic elastic properties of microtubules
14
A critical review of recent research on functionally graded plates
15
A cross-entropy-based approach for the optimization of flexible process planning
16
A deterministic finite element analysis of the effects of projectile characteristics on the impact response of fully clamped flexible woven fabrics
17
A discrete-event simulation approach with multiple-comparison procedure for stochastic resource-constrained project scheduling
18
A feature-based approach towards an integrated product model in intelligent design
19
A fibre direction compressive failure criterion for long fibre laminates at ply scale, including stacking sequence and laminate thickness effects
20
A finishing cutter selection algorithm for additive/subtractive rapid pattern manufacturing
21
A flexure-based long-stroke fast tool servo for diamond turning
22
A general exact solution for heat conduction in multilayer spherical composite laminates
23
A generalized higher-order theory for buckling of thick multi-layered composite plates with normal and transverse shear strains
24
A geometrically exact formulation for thin multi-layered laminated composite plates: Theory and experiment
25
A grade-3 method of zonation for seismic slope stability: An Italian case study
26
A ground motion selection algorithm based on the generalized conditional intensity measure approach
27
A Guide to the Project Management Body of Knowledge (PMBOK® Guide) - Fifth Edition
28
A hybrid algorithm to optimize cutting parameter for machining GFRP composite using alumina cutting tools
29
A hybrid model of fuzzy goal programming and grey numbers in continuous project time, cost, and quality tradeoff
30
A hybrid of theory and numerical simulation research for virtual rolling of double-groove ball rings
31
A layerwise finite element for multilayers with imperfect interfaces
32
A look-ahead and adaptive speed control algorithm for high-speed CNC equipment
33
A mathematical model and a heuristic approach for periodic material delivery in lean production environment
34
A mathematical model for prediction of microporosity in aluminum alloy A356
35
A mesh-free method using exponential basis functions for laminates modeled by CLPT, FSDT and TSDT – Part I: Formulation
36
A method for improving uncalibrated phase delay estimation and ambiguity-fixing in real-time precise point positioning
37
A method for predicting co-seismic displacements of slopes for landslide hazard zonation
38
A Methodology to Rapidly and Effectively Assess the Reliability of Conceptual Advanced Rocket Engines
39
A micro–meso computational strategy for the prediction of the damage and failure of laminates
40
A mixed elastohydrodynamic lubrication model with layered elastic theory for simulation of chemical mechanical polishing
41
A model of composite laminated beam based on the global–local theory and new modified couple-stress theory
42
A modeling and description method of multidimensional information for manufacturing capability in cloud manufacturing system
43
A modified couple stress model for bending analysis of composite laminated beams with first order shear deformation
44
A modified energy-balance model to predict low-velocity impact response for sandwich composites
45
A multiaxial fatigue damage model for fibre reinforced polymer composites
46
A multi‐layer matrix model of sustainable tourism: Process, measurement areas, gap and reconnection analyses
47
A multilevel method to assess and design the renovation and integration of Smart Cities
48
A multi-stage decision-making process for multiple attributes analysis under an interval-valued fuzzy environment
49
A new approach for deformation history of material elements in hole-flanging produced by single point incremental forming
50
A new approach to three-dimensional exact solutions for functionally graded piezoelectric laminated plates
51
A new finite element model for low-velocity impact analysis of sandwich beams subjected to multiple projectiles
52
A new history-independent modeling approach for feature-based design
53
A new hybrid approach to discrete multiple facility location problem
54
A new interpolation method of variable period and step size in micro-EDM milling based on square constraint
55
A new inverse hyperbolic shear deformation theory for static and buckling analysis of laminated composite and sandwich plates
56
A new method for the characterisation of rounded cutting edges
57
A new model of the antifriction effect on wiredrawing with ultrasound
58
A new optimal design and analysis method based on MADM for MEMS products development
59
A next step for sustainable urban design in the Netherlands
60
A nonlinear cohesive model for mixed-mode delamination of composite laminates
61
A nonlinear double-superposition global–local theory for dynamic buckling of imperfect viscoelastic composite/sandwich plates: A hierarchical constitutive model
62
A nonlinear finite element model using a unified formulation for dynamic analysis of multilayer composite plate embedded with SMA wires
63
A non-parametric wave type based model for real-time prediction of strong ground motion accelerogram
64
A n-order shear deformation theory for free vibration of functionally graded and composite sandwich plates
65
A note on final causes and their role in contextualism
66
A note on the power of strong ground motion during the January 17, 1994 earthquake in Northridge, California
67
A novel DE-GMAW method to weld steel tubes on simplified condition
68
A novel higher-order shear deformation theory with stretching effect for functionally graded plates
69
A novel mathematical model for grinding ball-end milling cutter with equal rake and clearance angle
70
A novel numerical–experimental approach for predicting delamination in high temperature polymer matrix composites
71
A novel size-dependent functionally graded curved mircobeam model based on the strain gradient elasticity theory
72
A numerical approach for modeling near-fault ground motion and its application in the 1994 Northridge earthquake
73
A numerical model of delamination in composite laminated beams using the LRZ beam element based on the refined zigzag theory
74
A numerical model of the structural behavior of buckling-restrained braces
75
A numerical study of the behavior of fully grouted rockbolts under dynamic loading
76
A parameters reduction method for monitoring multiple linear regression profiles
77
A parametric hardware fine acceleration/deceleration algorithm and its implementation
78
A particle swarm optimization algorithm with neighborhood-based mutation for sequence-dependent disassembly line balancing problem
79
A place meaning scale for tropical marine settings
80
A practical and unified global stability design method of buckling-restrained braces: Discussion on pinned connections
81
A practical optimization design of helical geometry drill point and its grinding process
82
A priori checking inconsistencies among strategic constraints for assembly plan generation
83
A process framework for theoretically grounded prescriptive research in the project management field
84
A psychological empowerment approach to online knowledge sharing
85
A reference station-based GNSS computing mode to support unified precise point positioning and real-time kinematic services
86
A remote CAE collaborative design system for complex product based on design resource unit
87
A review of meshless methods for laminated and functionally graded plates and shells
88
A review of stakeholder management performance attributes in construction projects
89
A review on the current research trends in ductile regime machining
90
A sense of home in residential care
91
A simple first-order shear deformation theory for the bending and free vibration analysis of functionally graded plates
92
A simple higher-order shear deformation theory for bending and free vibration analysis of functionally graded plates
93
A simple point cloud data reduction method based on Akima spline interpolation for digital copying manufacture
94
A simplified empirical method for assessing seismic soil-structure interaction effects on ordinary shear-type buildings
95
A size-dependent functionally graded sinusoidal plate model based on a modified couple stress theory
96
A slip-line approach to the machining with rounded-edge tool
97
A Smart City Initiative: the Case of Barcelona
98
A smart machine supervisory system framework
99
A solution to EIV model with inequality constraints and its geodetic applications
100
A state-of-the-art review of ductile cutting of silicon wafers for semiconductor and microelectronics industries
101
A State-of-the-Art Review on Debonding Failures of FRP Laminates Externally Adhered to Concrete
102
A study of a microstructure-dependent composite laminated Timoshenko beam using a modified couple stress theory and a meshless method
103
A study of optimization of injection molding process parameters for SGF and PTFE reinforced PC composites using neural network and response surface methodology
104
A study on high ratio cup drawing by Maslennikov’s process
105
A study on the application of the parallel seismic method in pile testing
106
A sulfuric-lactic acid process for efficient purification of fungal chitosan with intact molecular weight
107
A summated rating scale for measuring city image
108
A system for automated disassembly of snap-fit covers
109
A tabu search algorithm for unrelated parallel machine scheduling with sequence- and machine-dependent setups: minimizing total tardiness
110
A technique for routinely updating the ITU-R database using radio occultation electron density profiles
111
A theoretical study of nonlinear magnetoelectric effect in magnetostrictive–piezoelectric trilayer
112
A thermodynamic model for ionic polymer–metal composites and finite volume-finite element solution
113
A thickness-independent nonlocal shell model for describing the stability behavior of carbon nanotubes under compression
114
A three-dimensional micromechanical model to predict the viscoelastic behavior of woven composites
115
A three-dimensional semi-analytical model for the composite laminated plates with a stepped lap repair
116
A time probabilistic approach to seismic landslide hazard estimates in Iran
117
A two-rigid block model for sliding gravity retaining walls
118
A two-scale failure analysis of composite materials in presence of fiber/matrix crack initiation and propagation
119
A two-step feature selection method for monitoring tool wear and its application to the coroning process
120
A two-step optimization scheme for maximum stiffness design of laminated plates based on lamination parameters
121
A unified formulation for vibration analysis of composite laminated shells of revolution including shear deformation and rotary inertia
122
A unified higher order beam theory for buckling of a functionally graded microbeam embedded in elastic medium using modified couple stress theory
123
A variational asymptotic approach for hygrothermal analysis of composite laminates
124
About the influence of the infill panels over the collapse mechanisms actived under pushover analyses: Two case studies
125
Abrasive wear behaviour of B4C particle reinforced Al2024 MMCs
126
AC TIG welding with single-component oxide activating flux for AZ31B magnesium alloys
127
Accelerations of Nonstructural Components during Nonlinear Seismic Response of Multistory Structures
128
Accessibility toModern public spaces' in Latin-American cities: a multi-dimensional idea
129
ACCIDENTS ON SUBURBAN HIGHWAYS-TENNESSEE'S EXPERIENCE
130
Accounting for network effects in railway asset management
131
Accuracy of highway contractor's schedules
132
Accuracy of refined finite elements for laminated plate analysis
133
Accurate free vibration analysis of thermo-mechanically pre/post-buckled anisotropic multilayered plates based on a refined hierarchical trigonometric Ritz formulation
134
Accurate solution for free vibration analysis of functionally graded thick rectangular plates resting on elastic foundation
135
Accurate symplectic space solutions for thermal buckling of functionally graded cylindrical shells
136
Acoustics and Lighting Education in Architectural Engineering: Experience of WPI
137
Activated diffusion brazed repair for IN738 hot section components of gas turbines
138
Activated flux TIG welding of titanium
139
Active control of geometrically non-linear transient response of sandwich beams with a flexible core using piezoelectric patches
140
Active control of geometrically nonlinear vibrations of doubly curved smart sandwich shells using 1–3 piezoelectric composites
141
Active damping of geometrically nonlinear vibrations of doubly curved laminated composite shells
142
Active Monitoring and Control of Light Fixtures during Building Construction and Operation: Cyber-Physical Systems Approach
143
Adaptation of place perception for stops: Effects of spectral match between adaptor and test series
144
Adaptive execution of an NC program with feed rate optimization
145
Additive manufacturing of steel–bronze bimetal by shaped metal deposition: interface characteristics and tensile properties
146
Addressing the Need for Consistent Traffic Control Devices at Channelized Right Turn Lanes
147
Adjustment of geodetic measurements with mixed multiplicative and additive random errors
148
Advances and new directions in gas-sensing devices
149
Aggregate interlock in lightweight concrete continuous deep beams
150
Algorithms for geodesics
151
Alternative Model for Determining the Optimal Concession Period in Managing BOT Transportation Projects
152
Altitude distribution of radioactive cesium at Fuji volcano caused by Fukushima Daiichi Nuclear Power Station accident
153
Ambiguity resolution for triple-frequency geometry-free and ionosphere-free combination tested with real data
154
America's Highway Program
155
An accurate approach for finding the critical buckling stress of thick orthotropic plates
156
An active city approach for urban development
157
An adaptive feedrate scheduling method of dual NURBS curve interpolator for precision five-axis CNC machining
158
An adaptive off-line NURBS interpolator for CNC machining
159
An advanced model for initiation and propagation of damage under fatigue loading - part I: Model formulation
160
An advanced model for initiation and propagation of damage under fatigue loading – part II: Matrix cracking validation cases
161
An Analysis of the Repetition Pattern in Green facade focusing on the Biophilic Design
162
An analytical method for calculating stiffness of two-dimensional tri-axial braided composites
163
An analytical solution on interface debonding for large diameter carbon nanotube-reinforced composite with functionally graded variation interphase
164
An analytical study on the nonlinear free vibration of functionally graded nanobeams incorporating surface effects
165
An anchoring element for prestressed FRP reinforcement: simplified design of the anchoring area
166
An application of Hebbian learning in the design process decision-making
167
An approach to evaluate the effects of nonlinear traveling joints on dynamic behavior of large machine tools
168
An approach to response-based reliability analysis of quasi-linear Errors-in-Variables models
169
An architecture process maturity model of software product line engineering
170
An artificial immune algorithm for multiple-route job shop scheduling problem
171
An ecological perspective on theory, methods, and analysis in environmental psychology: Advances and challenges
172
An econometric approach to the planning of road development in developing countries
173
An effect of weld current and weld atmosphere on the resistance spot weldability of 304L austenitic stainless steel
174
An effective approach for utilizing damping solvent extraction method in frequency domain
175
An efficient approach for dynamic impedance of surface footing on layered half-space
176
An efficient finite element model for static and dynamic analyses of functionally graded piezoelectric beams
177
An efficient layerwise finite element for shallow composite and sandwich shells
178
An empirical model for shear capacity of RC deep beams using genetic-simulated annealing
179
An empirical study to evaluate machine tool production readiness and performance
180
An enhanced estimation of distribution algorithm for solving hybrid flow-shop scheduling problem with identical parallel machines
181
An equivalent material formulation for sinusoidal corrugated cores of structural sandwich panels
182
An evaluation method for school building design at the preliminary phase with optimisation of aspects of environmental comfort for the school system of the State São Paulo in Brazil
183
An exact analytical approach for free vibration of Mindlin rectangular nano-plates via nonlocal elasticity
184
An exact analytical solution for free vibration of functionally graded circular/annular Mindlin nanoplates via nonlocal elasticity
185
An exact solution for the free vibration analysis of laminated composite cylindrical shells with general elastic boundary conditions
186
An exact solution for thermal buckling of annular FGM plates on an elastic medium
187
An examination of constructivist and Gibsonian approaches to environmental psychology
188
An experimental approach to study the capability of end-milling for microcutting of glass
189
An experimental study of creep behavior of lightweight natural fiber-reinforced polymer composite/honeycomb core sandwich panels
190
An experimental study of different factors affecting the bond of NSM FRP bars in concrete
191
An experimental study of process variables in turning operations of Ti–6Al–4V and Cr–Co spherical prostheses
192
An experimental study of the effects of ultrasonic vibration on grinding surface roughness of C45 carbon steel
193
An experimental study on micro-EDM in low-resistivity deionized water using short voltage pulses
194
An experimental study on sag-resistance ability and applicability of sprayed FRP system on vertical and overhead concrete surfaces
195
An identification method for spindle rotation error of a diamond turning machine based on the wavelet transform
196
An image acquisition system for real-time seam tracking
197
An immune algorithm for hybrid flow shop scheduling problem with time lags and sequence-dependent setup times
198
An improved in-plane displacement model for the stability analysis of laminated composites with general lamination configurations
199
An improved model for naturally curved and twisted composite beams with closed thin-walled sections
200
An improved numerical integration method for predicting milling stability with varying time delay
201
An improved sampling rule for mapping geopotential functions of a planet from a near polar orbit
202
An integer programming approach for the three-dimensional cutting planning problem of marble processing industry
203
An integrated method for block assembly sequence planning in shipbuilding
204
An integrated study on the low-velocity impact response of the GLARE fibre-metal laminate
205
An integrated vendor–buyer inventory model with imperfect items and planned back orders
206
An intelligent system based on concurrent engineering for innovative product design at the conceptual design stage
207
An investigation into direct fabrication of fine-structured components by selective laser melting
208
An investigation on thermal, metallurgical and mechanical states in weld cracking of Inconel 738LC superalloy
209
An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish
210
Anaerobic on-site treatment of kitchen waste in combination with black water in UASB-septic tanks at low temperatures
211
Analysis and design of FRP externally-reinforced concrete beams against debonding-type failures
212
Analysis and design of the flexible composite membrane stretched on the spacecraft solar array frame
213
Analysis and optimization of heterogeneous materials using the variational asymptotic method for unit cell homogenization
214
Analysis of acoustic radiation of circular piezoelectric plates enclosed in a flat rigid shield
215
Analysis of acoustic radiation of circular piezoelectric plates with complex shapes in a flat rigid shield
216
Analysis of bond-slip effects in RC beams strengthened with NSM CFRP rods
217
Analysis of CFRP externally-reinforced steel CHS tubular beams
218
Analysis of cracks and notches in piezoelectric composites using scaled boundary finite element method
219
Analysis of crash data using quantile regression for counts
220
Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites
221
Analysis of friction in the ejection of thermoplastic mouldings
222
Analysis of functionally graded plates using an edge-based smoothed finite element method
223
Analysis of laser beam weldability of Inconel 738 superalloy
224
Analysis of multistable variable stiffness composite plates
225
Analysis of near-surface cracking under critical loading conditions using uncracked and cracked pavement models
226
Analysis of nonlinear vibration for symmetric angle-ply laminated viscoelastic plates with damage
227
Analysis of prestressed concrete pipe under combined loads
228
Analysis of sight distance, crash rate, and operating speed relationships for low-volume single-lane roundabouts in the United States
229
Analysis of stress concentration during tension of round pultruded composite rods: Errata
230
Analysis of temperature distributions in surface grinding with intermittent wheels
231
Analysis of the repeated absolute gravity measurements in the Czech Republic, Slovakia and Hungary from the period 1991–2010 considering instrumental and hydrological effects
232
Analysis of wave propagation in a plate resting on a Winkler foundation with a sample application to vibration control
233
Analysis of Window Installation Shim Space Tolerances
234
Analytical assessment of the load-carrying capacity of axially loaded wooden reinforced tubes
235
Analytical beam theory for the in-plane deformation of a composite strip with in-plane curvature
236
Analytical error analysis for satellite gravity field determination based on two-dimensional Fourier method
237
Analytical layerwise-elasticity transient and forced dynamic stress and displacement response prediction of the annular FGM sandwich plates
238
Analytical modelling of microstructure changes in the machining of 304 stainless steel
239
Analytical Procedures for Estimating the Capacity of the Urban Expressway Section near Off-Ramps and On-Ramps with a Median Exclusive Bus Lane
240
Analytical solutions for bending and buckling of functionally graded nanobeams based on the nonlocal Timoshenko beam theory
241
Analytical solutions for bending, vibration, and buckling of FGM plates using a couple stress-based third-order theory
242
Analyzing influence factors of transverse cracking on LTPP resurfaced asphalt pavements through NB and ZINB models
243
Annual Thermal Performance of a Hollow Roof in Combination with a Cavity Wall and Static Sunshade: Experimental Study of Energy-Efficient Rooms
244
Applicability of homotopy perturbation method to study the nonlinear vibration of doubly curved cross-ply shells
245
Application integrating axiomatic design and agile manufacturing unit in product evaluation
246
Application of Design Scenarios Methodology to Evaluate the Effectiveness of Transparent Parametric Design Spaces
247
Application of geographically weighted regression technique in spatial analysis of fatal and injury crashes
248
Application of least squares variance component estimation to errors-in-variables models
249
Application of nonlinear finite strip technique to concrete deep beams
250
Application of submerged arc welding technology with cold wire addition for drum shell long seam butt welds of pressure vessel components
251
Application of Taguchi philosophy for parametric optimization of bead geometry and HAZ width in submerged arc welding using a mixture of fresh flux and fused flux
252
Applying “Design Thinking” in the context of media management education
253
Approximate buckling interaction curves for long anisotropic flat plates in biaxial compression and shear
254
Approximate R-factor for cross-laminated timber walls in multistory buildings
255
Approximate solution procedure for dynamic traffic assignment
256
Arbitrary Lagrangian Eulerian formulation for soil structure interaction problems
257
Architectural factors influencing the sense of home in nursing homes: An operationalization for practice
258
Architectural lessons from environmental psychology: The case of biophilic architecture
259
Arsenic removal by electrocoagulation using combined Al-Fe electrode system and characterization of products
260
Arterial Road Incident Detection Based on Time-Moving Average Method in Bluetooth-Based Wireless Vehicle Reidentification System
261
Artificial intelligent modeling to predict tensile strength of inertia friction-welded pipe joints
262
Artificial neural networks for pitting potential prediction of resistance spot welding joints of AISI 304 austenitic stainless steel
263
Aspects of highway superelevation design
264
Aspects of road-accident death analyses
265
Assessing Historical Thinking & Understanding: Innovative Designs for New Standards (Book Review)
266
Assessing Real Estate Project Success Using an Analytic Network Process
267
Assessing Smart-Growth Strategies in Indian Cities: Grounded Theory Approach to Planning Practice
268
Assessing the effectiveness of empowerment on service quality: a multi-level study of Chinese tourism firms.
269
Assessing the Safety Effects of Removing Highway Mainline Barrier Toll Plazas
270
Assessing the Transferability of the Highway Safety Manual Predictive Method for Urban Roads in Fortaleza City, Brazil
271
Assessment of aflatoxin M1 contamination in the milk of four dairy species in Croatia
272
Assessment of correct fixing rate for precise point positioning ambiguity resolution on a global scale
273
Assessment of information technology effects on management of supply chain based on fuzzy logic in Iran tail industries
274
Assessment of pedestrian wind environment in urban planning design
275
Assessment of the strain monitoring reliability of fiber Bragg grating sensor (FBGs) in advanced composite structures
276
Assessment of the U.S. Nuclear Construction Industry in Terms of Human Capital and Construction Technologies
277
Assessment of winter maintenance of porous asphalt and its function for chloride source control
278
Asymptotic modeling of thin piezoelectric plates
279
Asymptotical construction of a fully coupled, Reissner–Mindlin model for piezoelectric and piezomagnetic laminates
280
Attaining Employee Empowerment
281
Auditory and phonetic processes in place perception for stops
282
Automated and continual determination of radio telescope reference points with sub-mm accuracy: results from a campaign at the Onsala Space Observatory
283
Automatic Horizontal Curve Identification and Measurement Method Using GPS Data
284
Availability approach to optimizing railway track renewal operations
285
Axial compressive behavior of FRP-confined concrete: Experimental test database and a new design-oriented model
286
Axisymmetric free vibration of closed thin spherical nano-shell
