<< مقالات لاتين >>
<< بر اساس عنوان >>
1
C0 beam elements based on the Refined Zigzag Theory for multilayered composite and sandwich laminates
2
C0-continuous triangular plate element for laminated composite and sandwich plates using the {2,2} – Refined Zigzag Theory
3
Calculation of reinforced concrete slabs, folds and sloping covers with breaking parameters, taking into account crack-forming
4
Calculation of shrinkage stress in early-age concrete pavements. I: calculation of shrinkage strain
5
Calibrating Road Design Guides Using Risk-Based Reliability Analysis
6
Calibration and Application of Treatment Performance Models in a Pavement Management System in Tennessee
7
Calibration and implementation of a sand plasticity plane-strain model for earthquake engineering applications
8
Calibration of an articulated CMM using stochastic approximations
9
Calibration of Pavement ME Design and Mechanistic-Empirical Pavement Design Guide Performance Prediction Models for Iowa Pavement Systems
10
Calibration of platoon dispersion parameter considering the impact of the number of lanes
11
Calibration of the clock-phase biases of GNSS networks: the closure-ambiguity approach
12
Case analysis to identify information links between facility management and healthcare delivery information in a hospital setting
13
Case Study of Ground-Source Heat Pump Applications in Hot and Humid Climates
14
Case Study of Occupant Costs in Roof Management
15
Cavitation erosion an​d corrosion behaviour of laser surface alloyed MMC of SiC an​d Si3N4 on Al alloy AA6061
16
Centrifuge model tests on liquefaction-induced settlement and pore water migration in non-homogeneous soil deposits
17
Changes of ambient gamma-ray dose rate in Katsushika Ward, metropolitan Tokyo before and after the Fukushima Daiichi Nuclear Power Plant accident
18
Changing a small-scale landscape: Environmental psychology applied to the problems of the countryside
19
Changing concepts of city and urban planning practices in Guangzhou (1949–2010): An approach to sustainable urban development
20
Characteristic features of excitation and propagation of acoustic modes in piezoelectric plates
21
Characteristic microbial communities in the continuous permafrost beside the bitumen in Qinghai-Tibetan Plateau
22
Characteristics of Jobs and Jobholders that Affect Job Satisfaction and Work Performance of Project Managers
23
Characterization of chip formation during machining 1045 steel
24
Characterization of high strength mortars with nano alumina at elevated temperatures
25
Characterization of microplastic deformation produced in 6061-T6 by using laser shock processing
26
Characterization of Prestressed Concrete Cylinder Pipe by Resonance Acoustic Spectroscopy
27
Characterization of the stiffness of unbound materials for pavement design: do we follow the right approach?
28
Characterization of tool wear an​d weld optimization in the friction-stir welding of cast aluminum 359+20% SiC metal-matrix composite
29
Characterizing situations in ASEAN cities: Using the Human Security Index
30
Chemical reactions during submerged arc welding with FeO-MnO-SiO2 fluxes
31
Citric acid/ZrO2 nanocomposite inducing thermal barrier and self-cleaning properties on protein fibers
32
City profile Lanzhou
33
City profile: Chengdu
34
City profile: Suzhou - a Chinese city under transformation
35
Clarification on ‘‘Thermo-Calc and Dictra simulation of constitutional liquation of gamma prime (c0) during welding of Ni-base superalloys”
36
Classification-driven model selection approach of genetic programming in modelling of turning process
37
Climate change adaptation tool for transportation: Mid-Atlantic region case study
38
Climatic considerations in school building design in the hot–humid climate for reducing energy consumption
39
Climatic sub-regions an​d design contextualism
40
Coating delamination by radial tension in prestressed concrete pipe. I: Experiments
41
Coating delamination by radial tension in prestressed concrete pipe. II: Analysis
42
Cohesive laws of composite bonded joints under mode I loading
43
Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates
44
Column buckling of multiwalled carbon nanotubes using nonlocal continuum mechanics
45
Combination of modeled short-term angular momentum function forecasts from atmosphere, ocean, and hydrology with 90-day EOP predictions
46
Combined decision making of congestion pricing and capacity expansion: genetic algorithm approach
47
Combined effect of resistance spot welding and post-welding sensitization on the degree of sensitization of AISI 304 stainless steel
48
Combining Cloud and sensors in a smart city environment
49
Combining the Statistical Model and Heuristic Model to Predict Flow Rate
50
Comment on "Nickel adsorption to hydrous ferric oxide in the presence of EDTA: effects of component addition sequence"
51
Comment on “Hybrid computational strategy based on ANN and GAPS: Application for identification of a non-linear model of composite material”
52
Comparative analysis of different environmental loading methods and their impacts on the GPS height time series
53
Comparative assessment of traffic control parameters within an UTC-distributed system
54
Comparative study of the electrical and structural properties of woven fabrics
55
Comparative study of the thermal performance of the novel green (planting) roofs against other existing roofs
56
Comparing Flexible Pavement Performance Using Emerging Analysis Tools
57
Comparison between Alternative Methods for Estimating Vehicle Class Distribution Input to Pavement Design
58
Comparison between GA and PSO in analyzing pavement management activities
59
Comparison between high strain dynamic and static load tests of helical piles in cohesive soils
60
Comparison of Clustering Methods for Road Group Identification in FHWA Traffic Monitoring Approach: Effects on AADT Estimates
61
Comparison of cranioplasty implants produced by machining and by casting in a gypsum mold
62
Comparison of nongradient methods with hybrid Taguchi-based epsilon constraint method for multiobjective optimization of cylindrical fin heat sink
63
Comparison of positioning accuracy of a rigorous sensor model and two rational function models for weak stereo geometry
64
Comparison of Predictive Cost Models for Bridge Replacement Projects
65
Comparison of traditional and Bayesian calibration techniques for gray-box modeling
66
Comparison of vertical alignments for rail transit
67
Composite damage model based on continuum damage mechanics and low velocity impact analysis of composite plates
68
Compression fatigue properties of z-pinned quasi-isotropic carbon/epoxy laminate with barely visible impact damage
69
Compressive failure of composite plates during one-sided heating
70
Compressive response of tapered composite shells
71
Compressive strain limits of composite repaired pipelines under combined loading states
72
Computational model for the control, performance evaluation, and calibration of a parallel mechanism
73
Computational modeling of the probabilistic impact response of flexible fabrics
74
Computer-aided design of railroad horizontal arc areas in adapting to satellite measurements
75
Computer-aided process planning for NC tool path generation of complex shoe molds
76
Concept of Stream Equivalency Factor for Heterogeneous Traffic on Urban Arterial Roads
77
Concepts of Space in Urban Design, Architecture and Art
78
Concurrent cell formation and layout design using scatter search
79
Concurrent tolerancing for design and manufacturing based on the present worth of quality loss
80
Concurrent Use of Benzodiazepines and Antidepressants and the Risk of Motor Vehicle Accident in Older Drivers: A Nested Case–Control Study
81
Cone penetrometer with a helical-type outer screw rod for evaluation of the subgrade condition
82
Confirming regional 1 cm differential geoid accuracy from airborne gravimetry: the Geoid Slope Validation Survey of 2011
83
Constant scallop-height tool path generation for three-axis discrete data points machining
84
Constrained optimum surface roughness prediction in turning of X20Cr13 by coupling novel modified harmony search-based neural network and modified harmony search algorithm
85
Constructibility issues for highway projects
86
Constructing Energy Efficiency: Rethinking and Redesigning the Architectural Detail
87
Consumers’ Views of Feng Shui: Antecedents an​d Behavioral Consequences
88
Contextualizing green building rating systems: Case study of Hong Kong
89
Continental mass change from GRACE over 2002–2011 and its impact on sea level
90
Continuous-beam analysis for highway bridges
91
Continuum damage modeling of composite laminated plates using higher order theory
92
Contribution of Aggressive Drivers to Automobile Tailpipe Emissions under Acceleration and Braking Conditions
93
Controlling hot cracking in Ni-based Inconel-718 superalloy cast sheets during tungsten inert gas welding
94
Conversion Method for Obtaining CO2 Emission Data from the Life Cycle Inventory Database of Foreign Countries
95
Cooling system of hot stamping of quenchable steel BR1500HS: optimization and manufacturing methods
96
Copper coating on graphite particles
97
Correlation among road unevenness indicators and vehicle vibration response
98
Correlation between degree of complexity and efficiency for intersections in China
99
Corrugated laminate analysis: A generalized plane-strain problem
100
Cost estimating model for mode choice between light rail and bus rapid transit systems
101
Cost-effectiveness analyses of maintenance treatments for low- and moderate-traffic asphalt pavements in Tennessee
102
Costs and Clinical Outcomes of Primary Prophylaxis Of Variceal Bleeding In Patients With Hepatic Cirrhosis: A Decision Analytic Model
103
Coupled dynamic buckling of thin-walled composite columns with open cross-sections
104
Coupled gravity dam–foundation analysis using a simplified direct method of soil–structure interaction
105
Covalent grafting of carbon nanotubes to PLA in order to improve compatibility
106
Crack Repair of Single Crystal Turbine Blades Using Laser Cladding Technology
107
Creating a larger role for environmental psychology: The Reasonable Person Model as an integrative framework
108
Creating Public Spaces and Practiced Places for Democracy, Discourse, and the Emergence of Civil Society
109
Creep behavior of pultruded GFRP elements – Part 1: Literature review and experimental study
110
Creep behavior of pultruded GFRP elements – Part 2: Analytical study
111
Creep feed grinding of burn-resistant titanium (BuRTi) using superabrasive wheels
112
Creep response of GFRP–concrete hybrid structures: Application to a footbridge prototype
113
Creep-rupturing of elliptical and circular cell honeycombs
114
Critical Assessment of an Enhanced Traffic Sign Detection Method Using Mobile LiDAR and INS Technologies
115
Critical Planning Theory
116
Critical traffic control locations for emergency evacuation
117
Cross-section designs for the safety performance of buffer-separated high-occupancy vehicle lanes
118
Crowdedness classification method for island platform in metro station
119
Crystallization behavior of organo-nanoclay treated and untreated kraft fiber–HDPE composites
120
Cu diffusion along Al grain boundaries
121
Cultural urban branding and creative cities: A theoretical framework for promoting creativity in the public spaces
122
Cultural worldviews and environmental risk perceptions: A meta-analysis
123
Cumulative travel-time responsive real-time intersection control algorithm in the connected vehicle environment
124
Cutting parameter and tool path style effects on cutting force and tool deflection in machining of convex and concave inclined surfaces
125
Cutting performance and wear mechanisms of Sialon–Si3N4 graded nano-composite ceramic cutting tools
بازگشت